SOP FOR OPERATION OF WATER BATH

1.0      Objective:

           The objective of this Standard Operating Procedure is to lay down the   procedure for Operation of Water Bath.

2.0       Scope:

            This SOP covers operating procedure of Water Bath 

3.0       Responsibility:

                Junior Research officer, Research Officer: Responsible for operation of the apparatus as   per procedure.
          QA Officer/QA Manager: Review the records and governing  the document.

4.0       Procedure

4.1       Fill R.O water in water bath up to the mark.

4.2       Then switch ON the power supply.

4.3       Switch ON the instrument.

4.4       Set the required temperature by rotating the knob in
clockwise direction. 

4.5       Temperature is maintained by auto control.

4.6       Put the sample to be heated on block of water bath.

4.7       After completion of work, switch OFF the instrument and power supply.

4.8       Take out the sample after heating.  

6.0       History of Revision:

Revision No.	Effective Date	Revision details	Reason for revision

Annexure - 1
Date	Booking No.	Parameter	Remark	Sign
Format No. : XXX/SOP/000                                Format No. : XXX/FRM/000-00